AZUR SYSTEMIllustration
Ultrafiltration Modules
Hollow-Fiber UF Modules
Define operation and cleaning around feed quality, permeate targets and inside-out or outside-in configuration.
Membrane-specificExplore ↗
AZUR SYSTEMIllustration
UF & MBR / Flat-Sheet MBR Modules
Flat-Sheet MBR Modules
Evaluate flat-sheet configurations by module area, maintenance clearance and operating water quality.
- Product type
- Flat-Sheet MBR Modules
- Material options
- Membrane-specific
- Specifications
- Confirmed by model and process
Images and specifications refer to the indicated models. Contact us to confirm configuration and suitability.
Construction & operating principle
A flat-sheet MBR module mounts membranes on support panels with permeate channels, arranged at defined spacing above an aeration zone. Water enters the collection channels through the membrane, while rising bubbles help limit surface deposits. Panel spacing, air distribution and maintenance access are important design variables. The flat-sheet format does not identify one particular membrane polymer.
Typical uses
- Solid-liquid separation in wastewater MBR systems
- Reuse treatment under suitable process conditions
- Membrane-tank layouts favouring panel-based maintenance
Compare product approaches
| Selection factor | What to compare |
|---|---|
| Materials | Consider membrane, backing panel and seals together when assessing chemical resistance. |
| Channels and aeration | Spacing and air distribution should suit mixed-liquor properties and deposition behaviour. |
| Service space | Panel withdrawal, lifting and cleaning routes require practical access. |
Selection information to confirm
| Category | Flat-Sheet MBR Modules |
|---|---|
| Material options | Membrane-specific |
| Filtration objective | Define what to remove and what to retain |
| Rating / Dimensions | Confirm combinations against controlled model specifications |
| Flow / Temperature / Pressure | Specify normal and limiting operating conditions |
| Connections / Seals | Confirm installation interfaces and wetted materials |
| Cleaning / Validation | Confirm the service cycle and acceptance criteria |
These are selection inputs, not verified performance claims for a specific model.
Build a clear application brief
Use the worksheet to collect your operating conditions. Contact us for controlled datasheets, dimensional drawings or validation documents for a specific model.
Product selection worksheet · TXT ↓Request technical documents ↗Use & maintenance
- 01
Installation
Maintain panel spacing and correct permeate connections, protecting surfaces from compression and scratches.
- 02
Operation
Track transmembrane pressure, production and aeration; blocked air paths can cause uneven fouling.
- 03
Maintenance
Use the model-supported cleaning mode rather than transferring a hollow-fibre backwash procedure.
Product questions
Can every flat-sheet membrane be backwashed?
No. The membrane and support design determine permitted operating modes.
Does clear permeate mean it is ready for reuse?
Dissolved contaminants and end-use water criteria still require complete treatment and analytical assessment.
RELATED PRODUCTS