GLY
GLY stainless-steel filter housings
Single-cartridge housing for lower-flow process liquids, with horizontal ports and a clamp closure.
Specifications & documents ↗FILTRATION / Filter Housings
Liquid Cartridge Housings
Match cartridge length, quantity and connections. Review wetted materials, sealing, venting and drainage.
- Product type
- Filter Housings
- Material options
- Stainless steel
- Specifications
- Confirmed by model and process
Images and specifications refer to the indicated models. Contact us to confirm configuration and suitability.
Construction & operating principle
A stainless-steel cartridge housing provides pressure containment, sealing and connections for replaceable elements. The housing does not define filtration rating; the effective path includes cartridges, interface seals, compression hardware and inlet/outlet passages. Single- and multi-element layouts address different flows, while venting, drainage and cleaning access influence startup, replacement and retained liquid after shutdown.
Typical uses
- Replaceable cartridge installation in process liquids
- Multi-element water prefiltration
- Support for specifically assessed hygienic fluid paths
Compare product approaches
| Selection factor | What to compare |
|---|---|
| Cartridge interface | Compression, plug-in and locking designs need their matching seals and supports, even at equal length. |
| Wetted materials | Steel grade, surface condition and elastomers must all suit the fluid. |
| Service layout | Vent and drain positions, opening method and withdrawal clearance affect maintenance. |
Selection information to confirm
| Category | Filter Housings |
|---|---|
| Material options | Stainless steel |
| Filtration objective | Define what to remove and what to retain |
| Rating / Dimensions | Confirm combinations against controlled model specifications |
| Flow / Temperature / Pressure | Specify normal and limiting operating conditions |
| Connections / Seals | Confirm installation interfaces and wetted materials |
| Cleaning / Validation | Confirm the service cycle and acceptance criteria |
These are selection inputs, not verified performance claims for a specific model.
Build a clear application brief
Use the worksheet to collect your operating conditions. Contact us for controlled datasheets, dimensional drawings or validation documents for a specific model.
Product selection worksheet · TXT ↓Request technical documents ↗PRODUCT SERIES
Product series & technical resources
Find a product series around your process requirements.
GLD
GLD stainless-steel filter housings
Multicartridge sanitary-design housing configurable by cartridge count and length.
Specifications & documents ↗
GLG
GLG stainless-steel filter housings
Compact in-line housing with top inlet and bottom outlet for gas or liquid filtration points.
Specifications & documents ↗
PTFE-lined stainless steel housing
PTFE-lined stainless-steel housings
304 stainless-steel housings with PTFE lining and seals for filtration points requiring corrosion-resistant wetted surfaces.
Specifications & documents ↗
H-CCF
H-CCF Single-cartridge industrial housings
Single-cartridge industrial housings selected by installation format, filtration element and actual process conditions. The historical catalogue provides a family overview.
Specifications & documents ↗
H-SCF
H-SCF Sanitary liquid filter housings
Sanitary liquid filter housings selected by installation format, filtration element and actual process conditions. The historical catalogue provides a family overview.
Specifications & documents ↗
H-ICF
H-ICF Industrial liquid filter housings
Industrial liquid filter housings selected by installation format, filtration element and actual process conditions. The historical catalogue provides a family overview.
Specifications & documents ↗Use & maintenance
- 01
Installation
Seat every element correctly and close unused positions as the housing design requires.
- 02
Filling
Vent gradually to prevent gas pockets that reduce effective area or distort pressure readings.
- 03
Opening
Isolate, depressurise and drain before inspecting seals and signs of corrosion or damage.
Product questions
Will a finer cartridge preserve existing flow?
Higher resistance may shift the operating point and require more area or different pumping.
Is any stainless housing hygienic?
Geometry, finish, drainability, seals and required documentation matter in addition to the metal designation.
RELATED PRODUCTS
Related products
Filter Housings
Bag Filter Housings
Review bag seals, support baskets and operating conditions when configuring liquid bag filtration.
Housing / bag dependentExplore ↗
Filter Housings
PFA Filter Housings
Check every wetted component for the chemical process. Temperature and pressure limits apply to the complete assembly.
PFA / assembly-dependentExplore ↗
Filter Housings
Gas Filter Housings
Specify gas composition, flow reference conditions, operating temperature and pressure, and installation requirements.
Configuration-specificExplore ↗