Fluorolink KML
Fluorolink PFA filter housings
PFA head and bowl for high-purity chemical service, compatible with TC or CLTC cartridge connections.
Specifications & documents ↗FILTRATION / Filter Housings
PFA Filter Housings
Check every wetted component for the chemical process. Temperature and pressure limits apply to the complete assembly.
- Product type
- Filter Housings
- Material options
- PFA / assembly-dependent
- Specifications
- Confirmed by model and process
Images and specifications refer to the indicated models. Contact us to confirm configuration and suitability.
Construction & operating principle
A PFA housing encloses replaceable cartridges in chemical-fluid service. The focus is the entire wetted assembly rather than the bowl alone. Base, seals, vent plugs and fittings may use different materials, each contributing limits. Elevated temperature also affects allowable pressure, so separately listed maximum temperature and pressure cannot automatically be combined into one operating condition.
Typical uses
- Cartridge installation in electronic-chemical lines
- Filtration nodes for compatible corrosive liquids
- Paths concerned with metal contact and cleanliness background
Compare product approaches
| Selection factor | What to compare |
|---|---|
| Wetted inventory | Identify the bowl, base, seals and fittings instead of inferring all-fluoropolymer construction from PFA. |
| Pressure and temperature | Use the assembly operating envelope rather than combining independent maxima. |
| Changeout design | Bowl and element removal affect residual liquid, exposure and service clearance. |
Selection information to confirm
| Category | Filter Housings |
|---|---|
| Material options | PFA / assembly-dependent |
| Filtration objective | Define what to remove and what to retain |
| Rating / Dimensions | Confirm combinations against controlled model specifications |
| Flow / Temperature / Pressure | Specify normal and limiting operating conditions |
| Connections / Seals | Confirm installation interfaces and wetted materials |
| Cleaning / Validation | Confirm the service cycle and acceptance criteria |
These are selection inputs, not verified performance claims for a specific model.
Build a clear application brief
Use the worksheet to collect your operating conditions. Contact us for controlled datasheets, dimensional drawings or validation documents for a specific model.
Product selection worksheet · TXT ↓Request technical documents ↗PRODUCT SERIES
Product series & technical resources
Find a product series around your process requirements.
HPFA
PFA locking filter housings
Cartridges lock into the bowl so the cartridge and housing can be removed together for chemical filtration in constrained spaces.
Specifications & documents ↗
PFA filter housing
Fluoropolymer filter housings
PFA base and body with selectable seals and locking ring for cartridges in electronic-chemical service.
Specifications & documents ↗
HCPA
HCPA PFA filter housing
Facility chemical-filter housing series with PFA body and cover listed in the materials table, for selection against the actual process fluid.
Specifications & documents ↗
UM-HPFA-F
PFA chemical filter housings
PFA body and base with selectable locking-ring and seal materials for high-purity corrosive chemicals.
Specifications & documents ↗Use & maintenance
- 01
Assembly
Use specified tightening methods, keeping seals clean and correctly positioned; excessive force can damage plastic components.
- 02
Commissioning
Fill and vent using a procedure suited to the chemical, assessing initial rinse background.
- 03
Maintenance
Isolate residual chemical exposure and inspect deformation, stress marks and seals.
Product questions
Is a PFA housing compatible with every acid or alkali?
Suitability depends on the complete assembly, concentration, temperature and exposure time.
Can both stated maxima apply together?
Consult the pressure-temperature relationship; separate maximum values do not establish a combined duty.
RELATED PRODUCTS
Related products
Filter Housings
Liquid Cartridge Housings
Match cartridge length, quantity and connections. Review wetted materials, sealing, venting and drainage.
Stainless steelExplore ↗
Filter Housings
Bag Filter Housings
Review bag seals, support baskets and operating conditions when configuring liquid bag filtration.
Housing / bag dependentExplore ↗
Filter Housings
Gas Filter Housings
Specify gas composition, flow reference conditions, operating temperature and pressure, and installation requirements.
Configuration-specificExplore ↗