AZUR SYSTEMIllustration
PES Membranes
PES Membrane Rolls
Evaluate membrane material for discs and filter assemblies against the actual fluid and assembly process.
PESExplore ↗
AZUR SYSTEMIllustration
MEMBRANES / PP Media
PP Filtration Media Rolls
Specify layer construction, thickness and conversion methods around particle loading and structural requirements.
- Product type
- PP Media
- Material options
- PP
- Specifications
- Confirmed by model and process
Images and specifications refer to the indicated models. Contact us to confirm configuration and suitability.
Construction & operating principle
PP filtration rollstock can use fibrous or membrane structures for cutting, laminating and pleating. Identical polymer names do not imply identical pore architecture. Fibrous media create a depth-capture network, whereas microporous films have different transport paths. Define the particle-control task first, then consider basis weight, thickness, support and the conversion process.
Typical uses
- Development of particulate prefilter layers
- Design of multilayer filtration media
- Conversion trials for PP cartridges and filter pads
Compare product approaches
| Selection factor | What to compare |
|---|---|
| Structure | Distinguish fibrous media from microporous film and use the relevant retention test method. |
| Layer arrangement | Coarse and fine layers can distribute loading, while excessive layers raise initial resistance. |
| Conversion dimensions | Thickness, width and uniformity affect forming; thermal compression can change local porosity. |
Selection information to confirm
| Category | PP Media |
|---|---|
| Material options | PP |
| Filtration objective | Define what to remove and what to retain |
| Rating / Dimensions | Confirm combinations against controlled model specifications |
| Flow / Temperature / Pressure | Specify normal and limiting operating conditions |
| Connections / Seals | Confirm installation interfaces and wetted materials |
| Cleaning / Validation | Confirm the service cycle and acceptance criteria |
These are selection inputs, not verified performance claims for a specific model.
Build a clear application brief
Use the worksheet to collect your operating conditions. Contact us for controlled datasheets, dimensional drawings or validation documents for a specific model.
Product selection worksheet · TXT ↓Request technical documents ↗Use & maintenance
- 01
Incoming inspection
Check thickness and visible defects while preserving lot and machine-direction information.
- 02
Lamination
Control compaction and edge sealing to avoid dense patches or interlayer bypass.
- 03
Application testing
Compare pressure rise and particle passage in the intended fluid; clean-water flow alone does not predict life.
Product questions
Does all-PP construction suit every chemical?
Compatibility still depends on composition, concentration, temperature and other components.
Does thicker media always hold more dirt?
Capacity also depends on pore distribution, particle characteristics and compaction under service conditions.
RELATED PRODUCTS