JPLCP
CMP capsule filters
Graded PP media for oversized-particle control in polishing slurries, offered in depth or pleated configurations.
Specifications & documents ↗The image shows a configurable capsule platform. Confirm the membrane and connections for the selected model.
FILTRATION / Capsule Filters
PP Capsule Filters
For particle control in small batches and process steps. Confirm loading requirements, flow and connections.
- Product type
- Capsule Filters
- Material options
- PP
- Specifications
- Confirmed by model and process
Images and specifications refer to the indicated models. Contact us to confirm configuration and suitability.
Construction & operating principle
A PP capsule encloses polypropylene media in an integrated housing for compact particle control. It can support small-batch transfer or point-of-use service, with depth, pleated or multilayer structures depending on the model. Capsules with similar external shapes may have different loading and retention behaviour, so media architecture, area and operating pressure should be considered together.
Typical uses
- Prefiltration of small process batches
- Particle control before coating or formulation
- Filtration in pilot equipment and compact transfer lines
Compare product approaches
| Selection factor | What to compare |
|---|---|
| Media structure | Depth capture and membrane sieving behave differently; compare them with the intended particles and fluid. |
| Loading and area | Concentrated particulate loads emphasise capacity rather than batch volume alone. |
| Connections and hold-up | Interfaces affect assembly, while residual volume affects recovery and rinsing. |
Selection information to confirm
| Category | Capsule Filters |
|---|---|
| Material options | PP |
| Filtration objective | Define what to remove and what to retain |
| Rating / Dimensions | Confirm combinations against controlled model specifications |
| Flow / Temperature / Pressure | Specify normal and limiting operating conditions |
| Connections / Seals | Confirm installation interfaces and wetted materials |
| Cleaning / Validation | Confirm the service cycle and acceptance criteria |
These are selection inputs, not verified performance claims for a specific model.
Build a clear application brief
Use the worksheet to collect your operating conditions. Contact us for controlled datasheets, dimensional drawings or validation documents for a specific model.
Product selection worksheet · TXT ↓Request technical documents ↗PRODUCT SERIES
Product series & technical resources
Find a product series around your process requirements.
K68
K68 capsule filters
Integrated capsule platform configured for process volume, membrane and connections.
Specifications & documents ↗
K85
K85 capsule filters
Integrated capsule platform configured for process volume, membrane and connections.
Specifications & documents ↗
K (60 mm)
K-series 60 mm capsule platform
The 60 mm housing-diameter option in the K capsule series; confirm the specific membrane, length and connection combination during selection.
Specifications & documents ↗
CFCME / CFCMP / CFCMC
CMP capsule filters
Compact PP capsules containing graded media for gels and impurities in CMP slurries.
Specifications & documents ↗
CFTHE / CFTHP
Three-port photoresist capsule filters
Compact point-of-use capsules for small and medium flows in display and lithography processes.
Specifications & documents ↗
CFPR
Pen-style photoresist capsules
Disposable pen-style capsules for photoresist processing at small flow rates and in restricted spaces.
Specifications & documents ↗
CFD / CFD2
Compact general-purpose capsules
Integrated cartridge and housing for laboratory or small-batch production, with multiple media choices.
Specifications & documents ↗
CFM
Small multi-connection capsules
Small integrated filters with media selected for the fluid and gel-removal requirement.
Specifications & documents ↗
CFRK
Low-hold-up capsule cartridges
A capsule format limits direct fluid contact during changeout for corrosive or volatile solvent duties.
Specifications & documents ↗
CFS
CFS capsule filters
Pleated media inside a PP housing for laboratory and small-batch liquid filtration.
Specifications & documents ↗
CFR
CFR capsule filters
Pleated media inside a PP housing for laboratory and small-batch liquid filtration.
Specifications & documents ↗
CFCAP
Quick-connect integrated capsule filters
Self-contained PP filter assemblies that connect directly to piping and support staged filtration layouts.
Specifications & documents ↗
UM-3PRC
Three-port process capsule filters
Low-hold-up three-port capsules for resins, developers, culture media and photonic-process fluids.
Specifications & documents ↗
UM-TPRC
Three-port process capsule filters
Low-hold-up three-port capsules for resins, developers, culture media and photonic-process fluids.
Specifications & documents ↗
UM-83PRC
Φ83 CMP capsule filters
Compact low-hold-up capsules for CMP applications, with PP, PES and PTFE media choices.
Specifications & documents ↗
105PRC
Disc-style gasket filters
An integrally molded disc-style filter with PP, PES or PTFE membranes for compact filtration points.
Specifications & documents ↗
WM / STBT
WM / STBT hose-connected capsule filters
Hose-connected capsules for small-batch liquid or gas filtration, with media selected by the specific configuration.
Specifications & documents ↗
NPT
NPT-threaded capsule filters
Compact NPT-threaded capsules for liquid and gas filtration, with application-specific media configurations.
Specifications & documents ↗
INKJET Main Filters
INKJET main filters
Main-filter family for inkjet systems using INK-PP depth elements, with multiple connections, dimensions and filtration areas.
Specifications & documents ↗Use & maintenance
- 01
Commissioning
Confirm direction, rinse as required and introduce liquid gradually to limit trapped gas.
- 02
Operation
Observe pressure rise and downstream particles; flow alone may miss changes in retention.
- 03
Replacement
Use the process endpoint and allowable differential pressure instead of an assumed calendar life.
Product questions
Can a PP capsule act as a sterilising filter?
Only if the particular grade and validation evidence support that duty.
Can it be washed and reused?
Reuse needs product-specific and process evidence; an integrated housing does not establish a regenerable design.
RELATED PRODUCTS
Related products
Capsule Filters
PES Capsule Filters
Start with liquid properties and filtration goals, then confirm membrane area, connections and operating conditions.
PESExplore ↗
Capsule Filters
PTFE Capsule Filters
Integrated filters with PTFE media. Confirm wetting and validation requirements separately for gas and liquid use.
PTFEExplore ↗