HFP / HFPH / HFM / HFMH / HFH / HFHH
High-flow water cartridges
Large-diameter single-open-end cartridges for high-flow particle filtration in facility water systems.
Specifications & documents ↗FILTRATION / High-Flow Cartridges
High-Flow Pleated Cartridges
Coordinate area and system configuration for higher throughput. Compare flow using the same fluid and pressure-drop conditions.
- Product type
- High-Flow Cartridges
- Material options
- Multiple media options
- Specifications
- Confirmed by model and process
Images and specifications refer to the indicated models. Contact us to confirm configuration and suitability.
Construction & operating principle
A high-flow pleated cartridge combines substantial media area with a purpose-designed flow path, support and seal arrangement. Its value belongs to the complete system: fewer elements can simplify changeout, while pipe losses, wet weight and service clearance may change. Rated flow is meaningful only with fluid, temperature and differential-pressure conditions, not cartridge length alone.
Typical uses
- Particle prefiltration in large water streams
- Fine-particle control before reverse osmosis
- Filtration nodes in circulating water or process liquids
Compare product approaches
| Selection factor | What to compare |
|---|---|
| Flow basis | Compare equivalent fluid, temperature and initial pressure drop; viscosity increases resistance. |
| Flow direction | Inside-out and outside-in designs require their matching housing arrangements. |
| Maintenance | Length, wet weight and withdrawal space determine practical changeout requirements. |
Selection information to confirm
| Category | High-Flow Cartridges |
|---|---|
| Material options | Multiple media options |
| Filtration objective | Define what to remove and what to retain |
| Rating / Dimensions | Confirm combinations against controlled model specifications |
| Flow / Temperature / Pressure | Specify normal and limiting operating conditions |
| Connections / Seals | Confirm installation interfaces and wetted materials |
| Cleaning / Validation | Confirm the service cycle and acceptance criteria |
These are selection inputs, not verified performance claims for a specific model.
Build a clear application brief
Use the worksheet to collect your operating conditions. Contact us for controlled datasheets, dimensional drawings or validation documents for a specific model.
Product selection worksheet · TXT ↓Request technical documents ↗PRODUCT SERIES
Product series & technical resources
Find a product series around your process requirements.
Prifend FDPHF
Prifend high-flow DIW cartridges
A 150 mm-diameter single-open-end pleated format with inside-out flow for DIW and bulk-chemical filtration.
Specifications & documents ↗
130
130 high-flow wet-process cartridges
Large-area 10-inch series for display-panel wet processes, with PP, PES or PTFE filtration media.
Specifications & documents ↗
HFL
HFL high-flow cartridges
Large-diameter, long-format filtration platform for process water and bulk fluid treatment.
Specifications & documents ↗
HFM
HFM high-flow cartridges
Large-diameter, long-format filtration platform for process water and bulk fluid treatment.
Specifications & documents ↗
HFK
HFK high-flow cartridges
Large-diameter, long-format filtration platform for process water and bulk fluid treatment.
Specifications & documents ↗
HF150P
HF150P high-flow PTFE cartridges
A 152 mm diameter PTFE filtration series for display wet processes, with inside-to-outside flow.
Specifications & documents ↗
HPF
High-flow panel-process cartridges
Large-diameter pleated cartridges for high-generation panel cleaning and chemical-liquid filtration.
Specifications & documents ↗Use & maintenance
- 01
Startup
Fill gradually, vent gas and verify seal seating rather than merely closing the housing.
- 02
Operation
Interpret pressure changes alongside flow and temperature to distinguish blockage from pump-setting changes.
- 03
Replacement
Isolate, depressurise and drain appropriately, then inspect sealing and support surfaces.
Product questions
Does greater flow per element always reduce cost?
Housing, pumping energy, service endpoint and replacement effort also contribute.
Can it replace a bag directly?
Only a deliberately compatible arrangement supports replacement; similar dimensions do not establish sealing or pressure capability.
RELATED PRODUCTS
Related products
High-Flow Cartridges
High-Flow Depth Cartridges
Balance media structure, pressure rise and replacement arrangements around particle loading and available space.