AZUR SYSTEMIllustration
Laboratory Equipment
Filtration Manifolds
Connect multiple filtration positions to a vacuum line. Review connections, parallel use and sterilization needs.
Configuration-specificExplore ↗
AZUR SYSTEMIllustration
LABORATORY / Laboratory Equipment
Membrane Handling Tools
Match membrane packaging, diameter and clean-handling requirements to the laboratory workflow.
- Product type
- Laboratory Equipment
- Material options
- Accessory
- Specifications
- Confirmed by model and process
Images and specifications refer to the indicated models. Contact us to confirm configuration and suitability.
Construction & operating principle
A membrane dispenser presents compatible packaged discs individually at a pickup position. It makes repeated handling more consistent and reduces direct manual contact. It does not change membrane retention or make a nonsterile membrane sterile. Packaging width, reel arrangement, disc diameter and pickup geometry must therefore be assessed as a combined consumable-and-tool system.
Typical uses
- Repeated membrane pickup for microbiological testing
- Dispensing continuously packaged gridded membranes
- Workflows seeking fewer manual opening steps
Compare product approaches
| Selection factor | What to compare |
|---|---|
| Packaging compatibility | Web width, reel core and indexing pitch determine feeding, not disc diameter alone. |
| Trigger method | Manual, button or sensor operation affects bench layout and use with gloves. |
| Cleaning access | The outlet and exterior need different treatment; protect internal drive components from liquid. |
Selection information to confirm
| Category | Laboratory Equipment |
|---|---|
| Material options | Accessory |
| Filtration objective | Define what to remove and what to retain |
| Rating / Dimensions | Confirm combinations against controlled model specifications |
| Flow / Temperature / Pressure | Specify normal and limiting operating conditions |
| Connections / Seals | Confirm installation interfaces and wetted materials |
| Cleaning / Validation | Confirm the service cycle and acceptance criteria |
These are selection inputs, not verified performance claims for a specific model.
Build a clear application brief
Use the worksheet to collect your operating conditions. Contact us for controlled datasheets, dimensional drawings or validation documents for a specific model.
Product selection worksheet · TXT ↓Request technical documents ↗Use & maintenance
- 01
Reel loading
Follow the packaging orientation and verify disc position and protective-layer separation.
- 02
Pickup
Touch only permitted areas; stop and correct misfeeding rather than repeatedly handling the membrane.
- 03
Batch change
Record the consumable lot, remove packaging fragments and inspect the outlet.
Product questions
Will one dispenser accept every brand?
Compatibility depends on the actual packaging geometry and should be checked with the intended pack.
Does automation remove the need for aseptic technique?
No. The tool, operator and work area remain part of contamination control; dispensing reduces only certain contacts.
RELATED PRODUCTS