01 / SPECIFICATIONS
Technical specifications
| Membrane | Hydrophobic PTFE |
|---|---|
| Support layer | PPS |
| Cage / core / end caps | PP |
| Outer diameter | 69 mm |
| Lengths | 5 / 10 / 20 / 30 in |
| Pore-size options | 0.01 μm (gas); 0.22 / 0.45 μm |
| Maximum operating temperature | 80 °C |
| Maximum forward differential pressure | 0.69 MPa @ 25 °C; 0.40 MPa @ 60 °C; 0.24 MPa @ 80 °C |
| Maximum reverse differential pressure | 0.30 MPa @ 25 °C; 0.10 MPa @ 80 °C |
| End connections | DOE / 222 fin / 226 fin / 222 flat / 226 flat / 215 flat |
| Steam-in-place conditions | 145 °C / 30 min; 100 forward cycles (ΔP < 30 kPa) + 50 reverse cycles (ΔP < 10 kPa) |
| Filtration area | 0.68 m² / 10 in |
02 / FEATURES
Key features
- Naturally hydrophobic membrane
- Multiple connection and seal options
03 / APPLICATIONS
Applications
Selection notes
- Sterilizing applications require process validation with the actual fluid, sterilization procedure and integrity test.
- The 0.01 μm rating refers to gas retention and does not establish 10 nm liquid filtration.
