01 / SPECIFICATIONS
Technical specifications
| Membrane | Hydrophilic PES |
|---|---|
| Support layer | PP |
| Cage / core / end caps | PP |
| Outer diameter | 69 mm |
| Lengths | 5 / 10 / 20 / 30 / 40 in |
| Pore-size options | 0.04 / 0.1 / 0.22 / 0.45 / 0.65 / 0.8 / 1.2 μm |
| Maximum operating temperature | 80 °C |
| Maximum forward differential pressure | 0.69 MPa @ 25 °C; 0.40 MPa @ 60 °C; 0.24 MPa @ 80 °C |
| Maximum reverse differential pressure | 0.30 MPa @ 25 °C; 0.10 MPa @ 80 °C |
| End connections | DOE / 222 fin / 226 fin / 222 flat / 226 flat / 215 flat |
| Steam-in-place conditions | 135 °C / 30 min / 100 cycles; ΔP < 30 kPa |
| Example bubble-point limit | ≥ 0.32 MPa; 0.22 μm, 10 in, 20 °C, water-wet, air test |
| Example diffusion limit | ≤ 25 mL/min @ 0.275 MPa; 0.22 μm, 10 in, 20 °C, water-wet |
02 / FEATURES
Key features
- Hydrophilic PES membrane with bubble-point and diffusion limits
- PP support and structural components
03 / APPLICATIONS
Applications
Selection notes
- Sterilizing applications require process validation with the actual fluid, sterilization procedure and integrity test.
